Imprimanta 3D Creatbot F430 HT
Recommended products
Description
Low cost high temperature 3D printer CreatBot F430 for Additive Manufacturing of PEEK filament
Buy the affordable CreatBot F430 high-temperature 3D printer for cost-effective additive manufacturing with PEEK filament. Thanks to its 70 °C heatable construction chamber, you can use it to process demanding industrial filaments made of ABS, PC, PP, nylon, PEEK and further materials. This 3D printer works with high precision and impressive manufacturing speed. Use it to produce parts for the engineering, aerospace, medical and automotive industries.
System features of the CreatBot F430:
- Heated installation space reduces warping
- Full metal hot end
- Hot end can be heated up to 420 °C
- High manufacturing precision
- Complete metal housing
- Large installation space: 40 x 30 x 30 cm
- Power failure backup to easily resume your 3D prints
- Filament sensor for status detection
- Glass ceramic printing bed for wonderfully smooth undersides
- Simple and intuitive operation via touch screen
- Direct drive of the extruder
- Automatic levelling and adjustment of the construction platform
- Completely enclosed installation space
- Air filter system for clean ambient air
High-temperature 3D printer – With 420 °C Hotend
CreatBot is one of the first manufacturers to launch truly affordable 420 °C high temperature 3D printers. The CreatBot F430 is equipped with a double extruder. The dual extruder enables 3D printing with a variety of different filaments. Produce components with a wide range of material properties. To optimize the 3D printing results, you can fine-tune the nozzle and select the perfect setting.
High precision & impressive manufacturing speed
Benefit from a precise industrial extruder guidance system. With this you can produce super precise and exact components. During the entire Additive Manufacturing process, the extruder runs smoothly and very evenly. The maximum production accuracy is up to 0.04 mm. 3D print and extrude filaments with the CreatBot F430 evenly and with minimal clogging of the nozzle.
Precision up to: 0.04 mm
Speed up to: 120 mm/s
| Construction an Technical Details | |
| Usable Nozzle Type | MK8 |
| Usable Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 420 ºC |
| Open Filament System | Yes |
| Extruder Type | direct drive |
| Recomended Printing Speed Max | 180 mm/s (depends on material)) |
| Build Area | 300 mm x 400 mm x 300 mm |
| Dual Build Area | 300 mm x 400 mm x 300 mm |
| Build Plate Temp Max | 140 ºC |
| Build Plate Surface | carbon fiber sheet, removable |
| Build Plate Material | pyroceram glass |
| Build Plate Attachment | fixed |
| Build Plate Leveling System | BL-Touch |
| Build Chamber During Process | Open or Closed |
| Build Chamber Heated | Yes, max 70°C |
| Filament Chamber Closed | Yes |
| Extruder Number Of | 2 |
| Extruder Construction Type Dual | Dual Head fixed height, manual adjustable |
| Installation Space / Requirements | |
| Total Mass Overall Dimensions | 485 mm x 620 mm x 680 mm |
| Total Weight | 48 kg |
| Ambient Operating Temperature | 15°C - 32°C |
| Max Power Consumption | 1500 W |
| Voltage | AC: 100 V - 230 V (50-60 Hz) |
| Equipment | |
| Hepa Filter | Yes |
| Filament Runout Sensor | Yes |
| Power Loss Fail Safe | Yes |
| Touch Screen | Yes |
| Connection | |
| USB Port | Yes |
| WLAN | No |
| Accuracy | |
| Layer Height | 0.02 - 0.5 mm |
| Resolution | 0.04 mm |
| Shipping | |
| Shipping Box | 580 mm x 750 mm x 720 mm |
| Shipping Weight | 62 kg |
Specificatii
| Tehnologie specifică | FDM FFF |
| Volum de imprimare (l) | 36 |
| Dimensiuni de imprimare (mm) | 400x300x300 |
| Diametru filament (mm) | 1,75 |
| Extrudoare | 2, direct drive |
| Duză de imprimare (mm) | 0,4 |
| Grosime strat (mm) | 0,02-0,35 |
| Viteză de imprimare (mm/s) | 10-180 |
| Viteză de deplasare (mm/s) | 10-200 |
| Temperatură de imprimare (°C) | max. 260 stânga max. 420 dreapta |
| Masă de imprimare | ceramică, ajustare automată, încălzită, max. 110 °C |
| Materiale compatibile | PLA, ABS, compozit, PA, PC, PET, HIPS, PP, TPU, PVA, PEEK, etc. |
| Afișaj | LCD full-color 4,3" |
| Comandă | ecran tactil |
| Conectivitate | USB |
| Suport media extern | USB stick |
| Software | CreatWare |
| Compatibilitate OS | Windows, Mac OS |
| Format fișiere | STL, OBJ, AMF |
| Alimentare | 100-240 V, 50/60 Hz, 300 W |
| Dimensiuni (mm) | 620x485x680 |
| Masă netă (kg) | 48 |
| Dimensiuni pachet (mm) | 750x580x720 |
| Masă pachet (kg) | 80 |